Sunday, August 24, 2014

ETI 4600

What have I done?
I have dragged a wounded monster back to my cave...

Behold the ETI 4600!

Roland MKS-50

I so REALLY DIDN'T NEED this, but it was so cheap, it would be criminal not to buy it!

Sunday, July 6, 2014

Juno-60 battery replaced but draining too fast

Juno-60 battery replaced but draining too fast

Replaced NiCd battery with lithium cell

TL;DR? Scroll down to the "Fix" header at the bottom to see how I solved it.

So this is one of those things I regret not documenting. I actually did this back in 2011 but I was too lazy to document it and of course too lazy to write any post about it.
It's not really a complicated process so I'll just describe it with words.
You see the old battery in a previous post about the Juno-60 here from May 2011, though I didn't put a new battery in at that time.

In October 2011, I just took a small stripboard, placed a CR2450 holder on it and attached it to the inside of the Juno case using a screw. I decided to use CR2450 instead of the usual CR2032 due to the increased capacity. I used two wires to connect it to where the battery pins should be soldered.
This worked well and I was able to save sounds again. Yay!

Battery draining too fast

...or maybe it didn't work that well.